Medium section winding machine

Based on the information provided, here is the optimized translation for the current question:

This machine is designed for coiling and binding of medium cross-section wires ranging from 10-70mm2 or circular sheathed wires with a diameter less than 20mm. It offers high production efficiency and delivers wiring quality that exceeds that of similar products in the market. The main components and technical characteristics of the equipment are as follows:

A. NHF-1250 Shaftless Pay-off Rack

1. Applicable cable reel: φ800-1250mm;

2. Applicable cable: 10-70mm2 or wire diameter less than 20mm;

3. Payoff speed: 0-150m/min;

4. Maximum load: 3T;

5. Opening and closing method: manual opening and closing;

6. Lifting method: hydraulic lifting, with upper and lower discs of top shaft rotating arms on both sides;

7. Braking method: magnetic powder tension braking;

B. European High-Precision Meter

1. Meter measurement form: four-wheel track type;

2. Maximum line speed: 500m/min;

3. Wire diameter range: 2-40mm;

4. Measurement accuracy: 0.1% (one thousandth);

5. Tensioning method: manual air pressure;

6. Induction method: rotary encoder;

C. Middle Cutting and Binding Machine

1. Cable layout method: automatic cable layout;

2. Engine speed: 200 rpm;

3. Outer diameter of tie wire: ≤ 650mm;

4. Number of cable slots: 3 slots;

5. Motor power: 5HP (3.7KW) variable frequency control;

6. Inner diameter of tie wire: φ 200mm (according to customer requirements);

7. Applicable cable: 10-70mm2 or wire diameter less than 20mm.